ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume II-5/W3
https://doi.org/10.5194/isprsannals-II-5-W3-229-2015
https://doi.org/10.5194/isprsannals-II-5-W3-229-2015
12 Aug 2015
 | 12 Aug 2015

Documentation for emergency condition mapping of Decorated historic surfaces at the Caid Residence, the Kasbah of Taourirt (Ouarzazate, Morocco)

K. Percy, C. Ouimet, S. Ward, M. Santana Quintero, C. Cancino, L. Wong, B. Marcus, S. Whittaker, and M. Boussalh

Keywords: 3D imaging, Recording, Photogrammetry, EDM, Computer-Aided Drawing, Conservation, Earthen Architecture, Documentation, Decorated Surfaces

Abstract. As it is broadly understood, recording serves as a basis for the diagnosis, treatment and preservation of historic places and contributes to record our built cultural heritage for posterity. This work is not a stand-alone practice but a part of the overall conservation process of cultural heritage at imminent risk of irreversible damage. Recording of heritage places should be directly related to the needs, skills and the technology that are available to the end users that are responsible for the management and care of these sites. They should be selected in a way that the future managers of these sites can also access and use the data collected. This paper explains an innovative heritage recording approach applied by the Getty Conservation Institute (GCI) and Carleton Immersive Media Studio (CIMS) in the documentation of historic decorated surfaces at the Caïd Residence, located at Tighermt (Kasbah) Taourirt in Ouarzazate, Morocco; as part of a collaborative project between the GCI and the Centre de Conservation et Réhabilitation du Patrimoine Architectural des Zones Atlasiques et Sub-Atlasiques (CERKAS) to rehabilitate the entire architectural ensemble. The selected recording techniques were used for the rapid mapping of conditions of the decorated surfaces at the Caïd Residence using international standards. The resulting work is being used by GCI staff, consultants and CERKAS team to conduct emergency stabilization and protection measures for these important decorated surfaces.