ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume X-3-2024
https://doi.org/10.5194/isprs-annals-X-3-2024-125-2024
https://doi.org/10.5194/isprs-annals-X-3-2024-125-2024
04 Nov 2024
 | 04 Nov 2024

Potential of the upcoming Biomass P-band radar mission for digital terrain modelling beneath dense tropical forests: first accuracy assessment

Mhamad El Hage, Ludovic Villard, Laurent Ferro-Famil, and Laurent Polidori

Keywords: Biomass, DEM, Accuracy, P-Band, SAR, Tomography, Forests

Abstract. P-band radar surveys can be used to produce digital elevation models (DEMs) at ground level in dense tropical forest areas. However, the previous performance studies were carried out on DEMs derived from high-resolution synthetic aperture radar (SAR) acquisitions, while the upcoming Biomass space mission should provide DEMs at a coarser resolution due to a frequency bandwidth of 6 MHz in range. The aim of this study is to predict the quality of the DEM products derived from Biomass data through dense forest. A DEM was produced in a slant range geometry at a 15-m mesh size using SAR tomography. It was compared to the reference LiDAR survey in terms of elevation and slope, and the statistical distribution of the corresponding error was analysed with regards to the radar off-nadir angle and to the local slope and aspect. The results show that the DEM elevation has no systematic error despite the presence of forest, and it has an RMS error of 3 meters. The DEM slope has a mean error of 2° and an RMS error of 6°. The behaviour of these errors for different terrain slopes and aspects will allow to predict the quality of Biomass DEMs on a variety of terrestrial landscapes.